Black 5x8 Coupling

T8 Anti Backlash Spring Loaded Nut For 8mm Acme Threaded Rod Lead Screws

02.00.17

125٫00 ج.م.‏ 50٫00 ج.م.‏

A brass nut with a spring mechanism that reduces the gap and play between the nut and the screw. It fits 8mm acme threaded rod lead screws with a pitch of 2mm and a lead of 8mm. Ideal for CNC and 3D printer applications.

GT2 20 Tooth 5mm Bore Timing Belt Pulley

04.00.03

50٫00 ج.م.‏ 40٫00 ج.م.‏

IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY

LMF8UU 8mm Inner Diameter Round Flange Linear Bearing Bushing CNC Router

05.00.79

175٫00 ج.م.‏ 110٫00 ج.م.‏

Type : 3D Printer Accessories Brand : Other

T Joining Plate Flat (Steel)

06.11.01

75٫00 ج.م.‏ 50٫00 ج.م.‏

"Type : 3D Printer Accessories Color: Black (Steel)"

Slide T-Nut 3mm (10 PCS)

02.00.11

84٫00 ج.م.‏ 75٫00 ج.م.‏

Used for : Aluminum Extrusion with Profile 20x20mm Thread Diameter: M3 Metric Slot Width: 3mm Total Size : 10 x 10 x 5mm Material: Carbon Steel Surface Finish: Carbon Steel Package Weight: 16g Package included quantity : 10pcs

Printed Angle Corner Connector

05.00.160

25٫00 ج.م.‏ 20٫00 ج.م.‏

Printed Angle Corner Connector is a connector that can be used to join two LED strip lights at a 90 degree angle. It is made of plastic and has a printed circuit board that allows for easy and solderless connection.

1m GT2 Rubber Timing Belt Width 10mm

12.10.02

75٫00 ج.م.‏ 60٫00 ج.م.‏

LENGTH : CUT PER METER ON DEMAND WIDTH : 10MM BELTS ARE SUPPLIED AS ONE LENGTH WHICH IS EASILY CUT TO THE REQUIRED LENGTH, ENOUGH FOR MOST VARIANTS OF 3D PRINTER DESIGNS. GOOD ANTI-CRACKING PERFORMANCE, AND SMALL EXTENDING RATE LONG SERVICE LIFE, BEARING WEAR AND TEAR, RESISTANT TO OIL, HEAT

Flanged Bearing 688ZZ 8x16x5

05.00.14

75٫00 ج.م.‏ 70٫00 ج.م.‏

These bearings fit perfectly when coupled with any plate with a 16mm hole. Designed to work with applications such as the 8mm Acme Lead Screw.

V-Slot 20x60 Linear Rail - 1M

657٫00 ج.م.‏ 600٫00 ج.م.‏

V-Slot Linear Rails are precise, easy to work with and allows you unlimited design control through it's modular nature

Threaded Rod Plate - Nema 17 Stepper Motor (Acrylic)

06.08.04

28٫00 ج.م.‏ 25٫00 ج.م.‏

Pair this Threaded Rod Plate for NEMA 17 stepper motor with a V-Slot rail and a matching length Lead Screw for a strong linear actuator ready to be used.

Gt2 6mm Closed Loop Timing Belt 2Gt-6 460mm Rubber Synchronous Belt

05.00.146

112٫00 ج.م.‏ 50٫00 ج.م.‏

Closed Loop Gt2 Timing Belt are great for creating reductions or change ratios.

1 Meter 4 Pin Cable For Nema Stepper Motors (Without Pin Headers)

12.13.01

25٫00 ج.م.‏ 20٫00 ج.م.‏

This product is a 1 meter long cable that connects Nema 17 stepper motors to 3D printer controllers or other devices. It is made of silicone rubber, plastic and metal, and can withstand high temperatures and currents.

LM10UU 10mm 10x19x29 Linear Ball Bearing Bush Bushing

05.00.43

100٫00 ج.م.‏ 60٫00 ج.م.‏

Linear bearings are used for linear motion. They can be used to build low cost and simple linear guiding systems for a wide variety of applications such as CNC and 3d printers. This linear ball bearing slides along an 10mm linear shaft.

2020 End Cap

28٫00 ج.م.‏

2020 Aluminum Profile End Cap plastic cover plate Size: 20x20

Mechanical Limit Switch / Endstop for 3D Printers With 70 CM Cable

03.00.72

80٫00 ج.م.‏ 50٫00 ج.م.‏

Brand : Other Type : Electronic Accessories

Aluminum Idler Pulley 5mm

04.00.11

70٫00 ج.م.‏ 50٫00 ج.م.‏

3D printer / CNC 2GT20 synchronous pulley Idler wheel 5mm Bore Diameter without teeth

NEMA 17 Stepper Motor L Holder Mount ( Steel )

06.16.02

112٫00 ج.م.‏ 100٫00 ج.م.‏

The NEMA 17 Stepper Motor L Holder Mount (Steel) is a sturdy and durable bracket that allows you to securely mount NEMA 17-size stepper motors to your project. It is made from 3mm-thick coated steel and features two slots for various mounting solutions. It also includes four M4×16mm screws, washers, and nuts for attaching the motor to the bracket.

GT2 20 Teeth synchronous Idler Pulley Bore 5mm

04.00.10

55٫00 ج.م.‏ 50٫00 ج.م.‏

GT 20 Synchronous Tooth Hysteresis Wheel Pulley Bore 5mm With GT2 Bearing Timing Belt Width 10mm Specifications: Type: AF Type with Bearing Timing Pulley Model Number: 2GTPitch: 2mm Tooth Number: 20 Width: 10mm Bore: 5mm Material

1Meter GT2 Timing Belt White PU With Steel Core 2GT-6MM GT2 Open Timing Belt for 3D Printer RepRap Prusa

12.09.01

120٫00 ج.م.‏ 50٫00 ج.م.‏

This timing belt is a non-slipping mechanical drive belt. It is made as a flexible belt with and steel core. Reinforce cord ensure the running capability in the driving. It runs over matching toothed pulleys or sprockets, made of rubber and perfect for 3D printers. Features: Made of PU material and steel core, very flexible and strong. Excellent process, good quality and durable, Strong abrasion resistance. Low noise, high wear resistance, small production tolerances. Compared with 2GT black belt with glass fiber core, strong steel core wires are joined in this white belt. For small precision machinery transmission, such as 3D printers, intelligent plotter, etc. Specifications: Color: White Material: PU, steel

Iron Nut 4mm - Pack 50

10.00.103

35٫00 ج.م.‏ 25٫00 ج.م.‏

Brand : Other Material : Iron Pack Quantity : 50

DRV-8825 Stepper Motor Driver

03.00.06

115٫00 ج.م.‏ 70٫00 ج.م.‏

Model Number : DRV-8825 Brand : Arduino STEPPER MOTOR DRIVER MODULE FOR ARDUINO AND RASPBERRY PI DIY PROJECTS INVOLVING STEPPER MOTOR DRIVING SUCH AS 3D PRINTERS, LASER CUTTER AND ENGRAVER AND DESKTOP CNC MACHINE. SPECIFICATIONS: SIX DIFFERENT STEPS RESOLUTIONS: FULL STEP, HALF STEP,

KP08 Self Align Mounted Pillow Block 8mm

02.00.26

160٫00 ج.م.‏ 145٫00 ج.م.‏

A zinc alloy pillow block bearing with 8mm bore diameter, suitable for various linear motion applications.

Limit Switch (Roller Lever)

04.00.74

43٫00 ج.م.‏ 30٫00 ج.م.‏

LIMIT SWITCHES SERVE AS THE MECHANISM THAT TELLS THE COMPUTER THE LIMITS OF THE 3D PRINTERS & CNC MACHINE. WHEN ONE OF THE AXES MOVES TO AN AXIS LIMIT, THE SWITCH IS ACTIVATED AND THE MACHINE STOPS.

40x40 Industrial Aluminum Profile Corner

05.00.140

56٫00 ج.م.‏ 50٫00 ج.م.‏

A 40x40 industrial aluminum profile corner is a metal bracket that connects two 40x40 aluminum profiles at a 90-degree angle. It is used for building sturdy and durable frames for various industrial applications.

Drop In T-Nut - M5 (20 PCS)

02.00.09

200٫00 ج.م.‏ 100٫00 ج.م.‏

Did you forget to add a Tee Nut? Drop In Tee Nuts are here to save you, just add them to any location on a V-Slot or C-Beam Linear Rail.

Black 2020 Slots Corner Angle L Brackets Connector Fasten Aluminum Profile Accessories

05.00.91

67٫00 ج.م.‏ 57٫00 ج.م.‏

Type: Corner Brackets DIY Supplies: Metalworking Process: Casting Surface treatment: Sand blasting color: Black Material: aluminum size: 20*20*17mm Package Contents: Aluminum alloy fixed corner piece Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Solid V Wheel Kit

05.00.10

105٫00 ج.م.‏ 50٫00 ج.م.‏

Complete kit includes all assembly hardware. Precise smooth motion for light to medium duty applications ie: 3D Printer. Flat surface with a V shaped outer edge allows the wheel to center ride in the track of V-Slot Linear Rail and C-Beam Linear Rail . Flat profile designed to work effortlessly with a belt on a belt and pinion system as well as lead screw and belt driven systems.

LM8UU 8mm 8x15x24mm Linear Ball Bearing Bush Bushing (Short)

05.00.73

55٫00 ج.م.‏ 40٫00 ج.م.‏

Material Housing heat treated plated hard chrome steel. Cage Engineering plastics.Main dimensions ID 8mm,OD 15mm,Length 17-24mm.

Double T-Nut - M5

10.00.149

13٫00 ج.م.‏ 10٫00 ج.م.‏

Slide in Double Tee Nuts are a fundamental part of every build adding more flexibility to our system modularity.

V-Slot 20x20 Linear Rail - 1M

200٫00 ج.م.‏ 160٫00 ج.م.‏

High-quality aluminum linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.

Black Angle Corner Connector

05.00.93

97٫00 ج.م.‏ 75٫00 ج.م.‏

"MOUNT THIS CORNER TO V-SLOT LINEAR RAIL USING M5X8MM LOW PROFILE SCREWS AND M5 TEE NUTS." COMPATIBLE WITH V-SLOT LINEAR RAIL ANODIZED ALUMINUM COLOR: BLACK

V-Slot 20x40 Linear Rail - 1M

400٫00 ج.م.‏ 300٫00 ج.م.‏

High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature. V-Slot Linear Rail is the ultimate solution combining both linear motion and a modular, structural framing system. It's lightweight yet rigid and provides an ultra smooth track for precise motion. In 2013, OpenBuilds created V-Slot Linear Rail and has added a library of compatible modular Parts which today is known as the OpenBuilds System. Over 1,000,000 feet of V-Slot has been shipped to businesses, classrooms, laboratories and makers all over the world! Much like working with lumber, you can cut V-Slot on a chop saw (using a metal blade) or even use a hacksaw. From there, you simply use a screw driver to make the connections.

Slide T-Nut 5mm (10 PCS)

02.00.13

127٫00 ج.م.‏ 50٫00 ج.م.‏

Used for : Aluminum Extrusion with Profile 20x20mm

Silver 2020 Slots Corner Angle L Brackets Connector Fasten Aluminum Profile Accessories

05.00.92

60٫00 ج.م.‏

These 20 Series Brackets can be widely used in industrial and furniture building. Especially for connecting right angle corner of windows, doors, work desk and other furniture. Premium Quality – The corner brackets are made of quality aluminum alloy, which has strong hardness. Durable for long term use. Good rust resistance performance. For 20 Series Aluminum Extrusion – These right angle corner brackets with 2 holes can match 20 series aluminum brackets well. The hole size of the corner bracket is 6mm. Great for 3D printers, Routers, cutting machines and robotics projects. Application: Suitable for 20 series aluminum extrusion

Lock Collar

04.00.212

45٫00 ج.م.‏ 25٫00 ج.م.‏

A metal or plastic component that fits onto a shaft and prevents axial movement.

SCS8UU Linear Motion Slide Bearing Block 8mm

05.00.81

100٫00 ج.م.‏ 85٫00 ج.م.‏

SCS8UU 8mm Aluminum Linear Motion Ball Bearing Slide Bushing For CNC.

Nylock Insert Hex LockNut - M5

02.00.06

7٫00 ج.م.‏ 5٫00 ج.م.‏

These Nylon locknuts contain a washer mounted inside the nut that enhances its hold on the nut.

Stainless Steel Angel Corner 90 Degree Two Hole

05.00.90

43٫00 ج.م.‏ 30٫00 ج.م.‏

Brand : Other Type : 3D Printer Accessories

Bearing 608zz 8x22x7

05.00.16

43٫00 ج.م.‏ 35٫00 ج.م.‏

Bearing 608zz 8x22x7 is a type of deep groove ball bearing that has two metal shields on both sides to protect the balls from dust and debris. It is suitable for high-speed applications and can support both radial and axial loads.

M4 Compression Springs Stainless Steel - Pack of 4

10.00.132

24٫00 ج.م.‏ 10٫00 ج.م.‏

These compression springs are made of high-quality stainless steel and have a wire diameter of 0.5mm, an outer diameter of 5.2mm, an inner diameter of 4.2mm, and a length of 20mm. They are suitable for various applications that require compressed force, such as automotive, aerospace, industrial, medical, and technology products.

1m GT2 Rubber Timing Belt Width 6mm

12.09.02

92٫00 ج.م.‏ 70٫00 ج.م.‏

There is no limit to the types of linear motion you can create by making an actuator based on one of these GT2 Timing Belts. They are popular for fast and lightweight movement.

Drop In T-Nut - M3 (20 PCS)

02.00.07

168٫00 ج.م.‏ 150٫00 ج.م.‏

Did you forget to add a Tee Nut? Drop In Tee Nuts are here to save you, just add them to any location on a V-Slot or C-Beam Linear Rail.

SK8 Linear Rod & Shaft End Support 8mm

02.00.24

75٫00 ج.م.‏ 70٫00 ج.م.‏

SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination with precision linear bearings and other applications requiring a precise, round hardened shaft or guide rod. Our SK08 Linear Shaft Supports have overhead clearance by support shaft and end mounting for support.

T-Slot Bolt 20series M5 x 10MM

02.00.21

9٫00 ج.م.‏ 5٫00 ج.م.‏

Brand : Other Type : 3D Printer Accessories

Nylock Nut 3mm Stainless Steel

02.00.32

3٫00 ج.م.‏

MADE FROM HIGH QUALITY 304 STAINLESS STEEL KNOWN FOR ITS DEPENDABLE AND RIGID STRENGTH AS WELL AS ITS CORROSION RESISTANT QUALITY.

M7 Heated Bed Spring & Wade extruder spring

04.00.103

15٫00 ج.م.‏ 10٫00 ج.م.‏

Item specifics :- Type : 3d printer spring Wire diameter : 1.2mm Outer diameter : 7.5mm Inner diameter : 7mm Height : 21mm Number of turns : 9 turns Apply to : 3d printer platform

Spacer Block 6mm (Acrylic)

06.01.05

43٫00 ج.م.‏ 38٫00 ج.م.‏

The V-Slot Spacer Blocks were designed to be used in conjunction with the V-Slot Gantry Plate. "This Spacer Block allows you to raise the V-Slot Gantry Plate up away from the rail 12mm, so that you can run transmission components, such as a Belt Drive or Threaded Rod underneath the V-Slot Gantry Plate." Product Details Qty. 1 M5 Tapped Holes to allow mounting to the V-Slot Gantry Plate 3 Holes that allow for mounting of full size OpenBuilds Wheels Anodized Aluminum Color: Black OpenBuilds Part CAD Models and Drawings Brand : OpenBuilds Type : 3D Printer Accessories

V-Slot Gantry Plate - Universal (Acrylic)

06.12.04

100٫00 ج.م.‏

Our universal gantry plate suitable for many build designs. 3D printing extruders, diode lasers, plasma heads are just some of the possibilities.

Eccentric Spacer 6mm

04.00.49

35٫00 ج.م.‏ 25٫00 ج.م.‏

These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the CAM hole is located.

Anti-Backlash Nut Block for 8mm Metric Acme Lead Screw

04.00.213

150٫00 ج.م.‏ 60٫00 ج.م.‏

This Anti-Backlash Nut Block for 8mm Lead Screw is a great choice for many build projects requiring lead screw linear motion where high precision and repeatability with zero play or slop is needed.

T8 Anti Backlash Spring Loaded Nut For 8mm Acme Threaded Rod Lead Screws

02.00.17

125٫00 ج.م.‏ 50٫00 ج.م.‏

A brass nut with a spring mechanism that reduces the gap and play between the nut and the screw. It fits 8mm acme threaded rod lead screws with a pitch of 2mm and a lead of 8mm. Ideal for CNC and 3D printer applications.

GT2 20 Tooth 5mm Bore Timing Belt Pulley

04.00.03

50٫00 ج.م.‏ 40٫00 ج.م.‏

IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY

LMF8UU 8mm Inner Diameter Round Flange Linear Bearing Bushing CNC Router

05.00.79

175٫00 ج.م.‏ 110٫00 ج.م.‏

Type : 3D Printer Accessories Brand : Other

T Joining Plate Flat (Steel)

06.11.01

75٫00 ج.م.‏ 50٫00 ج.م.‏

"Type : 3D Printer Accessories Color: Black (Steel)"

Slide T-Nut 3mm (10 PCS)

02.00.11

84٫00 ج.م.‏ 75٫00 ج.م.‏

Used for : Aluminum Extrusion with Profile 20x20mm Thread Diameter: M3 Metric Slot Width: 3mm Total Size : 10 x 10 x 5mm Material: Carbon Steel Surface Finish: Carbon Steel Package Weight: 16g Package included quantity : 10pcs

Printed Angle Corner Connector

05.00.160

25٫00 ج.م.‏ 20٫00 ج.م.‏

Printed Angle Corner Connector is a connector that can be used to join two LED strip lights at a 90 degree angle. It is made of plastic and has a printed circuit board that allows for easy and solderless connection.

1m GT2 Rubber Timing Belt Width 10mm

12.10.02

75٫00 ج.م.‏ 60٫00 ج.م.‏

LENGTH : CUT PER METER ON DEMAND WIDTH : 10MM BELTS ARE SUPPLIED AS ONE LENGTH WHICH IS EASILY CUT TO THE REQUIRED LENGTH, ENOUGH FOR MOST VARIANTS OF 3D PRINTER DESIGNS. GOOD ANTI-CRACKING PERFORMANCE, AND SMALL EXTENDING RATE LONG SERVICE LIFE, BEARING WEAR AND TEAR, RESISTANT TO OIL, HEAT

Flanged Bearing 688ZZ 8x16x5

05.00.14

75٫00 ج.م.‏ 70٫00 ج.م.‏

These bearings fit perfectly when coupled with any plate with a 16mm hole. Designed to work with applications such as the 8mm Acme Lead Screw.

V-Slot 20x60 Linear Rail - 1M

657٫00 ج.م.‏ 600٫00 ج.م.‏

V-Slot Linear Rails are precise, easy to work with and allows you unlimited design control through it's modular nature

Threaded Rod Plate - Nema 17 Stepper Motor (Acrylic)

06.08.04

28٫00 ج.م.‏ 25٫00 ج.م.‏

Pair this Threaded Rod Plate for NEMA 17 stepper motor with a V-Slot rail and a matching length Lead Screw for a strong linear actuator ready to be used.

Gt2 6mm Closed Loop Timing Belt 2Gt-6 460mm Rubber Synchronous Belt

05.00.146

112٫00 ج.م.‏ 50٫00 ج.م.‏

Closed Loop Gt2 Timing Belt are great for creating reductions or change ratios.

1 Meter 4 Pin Cable For Nema Stepper Motors (Without Pin Headers)

12.13.01

25٫00 ج.م.‏ 20٫00 ج.م.‏

This product is a 1 meter long cable that connects Nema 17 stepper motors to 3D printer controllers or other devices. It is made of silicone rubber, plastic and metal, and can withstand high temperatures and currents.

LM10UU 10mm 10x19x29 Linear Ball Bearing Bush Bushing

05.00.43

100٫00 ج.م.‏ 60٫00 ج.م.‏

Linear bearings are used for linear motion. They can be used to build low cost and simple linear guiding systems for a wide variety of applications such as CNC and 3d printers. This linear ball bearing slides along an 10mm linear shaft.

2020 End Cap

28٫00 ج.م.‏

2020 Aluminum Profile End Cap plastic cover plate Size: 20x20

Mechanical Limit Switch / Endstop for 3D Printers With 70 CM Cable

03.00.72

80٫00 ج.م.‏ 50٫00 ج.م.‏

Brand : Other Type : Electronic Accessories

Aluminum Idler Pulley 5mm

04.00.11

70٫00 ج.م.‏ 50٫00 ج.م.‏

3D printer / CNC 2GT20 synchronous pulley Idler wheel 5mm Bore Diameter without teeth

NEMA 17 Stepper Motor L Holder Mount ( Steel )

06.16.02

112٫00 ج.م.‏ 100٫00 ج.م.‏

The NEMA 17 Stepper Motor L Holder Mount (Steel) is a sturdy and durable bracket that allows you to securely mount NEMA 17-size stepper motors to your project. It is made from 3mm-thick coated steel and features two slots for various mounting solutions. It also includes four M4×16mm screws, washers, and nuts for attaching the motor to the bracket.

GT2 20 Teeth synchronous Idler Pulley Bore 5mm

04.00.10

55٫00 ج.م.‏ 50٫00 ج.م.‏

GT 20 Synchronous Tooth Hysteresis Wheel Pulley Bore 5mm With GT2 Bearing Timing Belt Width 10mm Specifications: Type: AF Type with Bearing Timing Pulley Model Number: 2GTPitch: 2mm Tooth Number: 20 Width: 10mm Bore: 5mm Material

1Meter GT2 Timing Belt White PU With Steel Core 2GT-6MM GT2 Open Timing Belt for 3D Printer RepRap Prusa

12.09.01

120٫00 ج.م.‏ 50٫00 ج.م.‏

This timing belt is a non-slipping mechanical drive belt. It is made as a flexible belt with and steel core. Reinforce cord ensure the running capability in the driving. It runs over matching toothed pulleys or sprockets, made of rubber and perfect for 3D printers. Features: Made of PU material and steel core, very flexible and strong. Excellent process, good quality and durable, Strong abrasion resistance. Low noise, high wear resistance, small production tolerances. Compared with 2GT black belt with glass fiber core, strong steel core wires are joined in this white belt. For small precision machinery transmission, such as 3D printers, intelligent plotter, etc. Specifications: Color: White Material: PU, steel

Iron Nut 4mm - Pack 50

10.00.103

35٫00 ج.م.‏ 25٫00 ج.م.‏

Brand : Other Material : Iron Pack Quantity : 50

DRV-8825 Stepper Motor Driver

03.00.06

115٫00 ج.م.‏ 70٫00 ج.م.‏

Model Number : DRV-8825 Brand : Arduino STEPPER MOTOR DRIVER MODULE FOR ARDUINO AND RASPBERRY PI DIY PROJECTS INVOLVING STEPPER MOTOR DRIVING SUCH AS 3D PRINTERS, LASER CUTTER AND ENGRAVER AND DESKTOP CNC MACHINE. SPECIFICATIONS: SIX DIFFERENT STEPS RESOLUTIONS: FULL STEP, HALF STEP,

KP08 Self Align Mounted Pillow Block 8mm

02.00.26

160٫00 ج.م.‏ 145٫00 ج.م.‏

A zinc alloy pillow block bearing with 8mm bore diameter, suitable for various linear motion applications.

Limit Switch (Roller Lever)

04.00.74

43٫00 ج.م.‏ 30٫00 ج.م.‏

LIMIT SWITCHES SERVE AS THE MECHANISM THAT TELLS THE COMPUTER THE LIMITS OF THE 3D PRINTERS & CNC MACHINE. WHEN ONE OF THE AXES MOVES TO AN AXIS LIMIT, THE SWITCH IS ACTIVATED AND THE MACHINE STOPS.

40x40 Industrial Aluminum Profile Corner

05.00.140

56٫00 ج.م.‏ 50٫00 ج.م.‏

A 40x40 industrial aluminum profile corner is a metal bracket that connects two 40x40 aluminum profiles at a 90-degree angle. It is used for building sturdy and durable frames for various industrial applications.

Drop In T-Nut - M5 (20 PCS)

02.00.09

200٫00 ج.م.‏ 100٫00 ج.م.‏

Did you forget to add a Tee Nut? Drop In Tee Nuts are here to save you, just add them to any location on a V-Slot or C-Beam Linear Rail.

Black 2020 Slots Corner Angle L Brackets Connector Fasten Aluminum Profile Accessories

05.00.91

67٫00 ج.م.‏ 57٫00 ج.م.‏

Type: Corner Brackets DIY Supplies: Metalworking Process: Casting Surface treatment: Sand blasting color: Black Material: aluminum size: 20*20*17mm Package Contents: Aluminum alloy fixed corner piece Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Solid V Wheel Kit

05.00.10

105٫00 ج.م.‏ 50٫00 ج.م.‏

Complete kit includes all assembly hardware. Precise smooth motion for light to medium duty applications ie: 3D Printer. Flat surface with a V shaped outer edge allows the wheel to center ride in the track of V-Slot Linear Rail and C-Beam Linear Rail . Flat profile designed to work effortlessly with a belt on a belt and pinion system as well as lead screw and belt driven systems.

LM8UU 8mm 8x15x24mm Linear Ball Bearing Bush Bushing (Short)

05.00.73

55٫00 ج.م.‏ 40٫00 ج.م.‏

Material Housing heat treated plated hard chrome steel. Cage Engineering plastics.Main dimensions ID 8mm,OD 15mm,Length 17-24mm.

Double T-Nut - M5

10.00.149

13٫00 ج.م.‏ 10٫00 ج.م.‏

Slide in Double Tee Nuts are a fundamental part of every build adding more flexibility to our system modularity.

V-Slot 20x20 Linear Rail - 1M

200٫00 ج.م.‏ 160٫00 ج.م.‏

High-quality aluminum linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.

Black Angle Corner Connector

05.00.93

97٫00 ج.م.‏ 75٫00 ج.م.‏

"MOUNT THIS CORNER TO V-SLOT LINEAR RAIL USING M5X8MM LOW PROFILE SCREWS AND M5 TEE NUTS." COMPATIBLE WITH V-SLOT LINEAR RAIL ANODIZED ALUMINUM COLOR: BLACK

V-Slot 20x40 Linear Rail - 1M

400٫00 ج.م.‏ 300٫00 ج.م.‏

High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature. V-Slot Linear Rail is the ultimate solution combining both linear motion and a modular, structural framing system. It's lightweight yet rigid and provides an ultra smooth track for precise motion. In 2013, OpenBuilds created V-Slot Linear Rail and has added a library of compatible modular Parts which today is known as the OpenBuilds System. Over 1,000,000 feet of V-Slot has been shipped to businesses, classrooms, laboratories and makers all over the world! Much like working with lumber, you can cut V-Slot on a chop saw (using a metal blade) or even use a hacksaw. From there, you simply use a screw driver to make the connections.

Slide T-Nut 5mm (10 PCS)

02.00.13

127٫00 ج.م.‏ 50٫00 ج.م.‏

Used for : Aluminum Extrusion with Profile 20x20mm

Silver 2020 Slots Corner Angle L Brackets Connector Fasten Aluminum Profile Accessories

05.00.92

60٫00 ج.م.‏

These 20 Series Brackets can be widely used in industrial and furniture building. Especially for connecting right angle corner of windows, doors, work desk and other furniture. Premium Quality – The corner brackets are made of quality aluminum alloy, which has strong hardness. Durable for long term use. Good rust resistance performance. For 20 Series Aluminum Extrusion – These right angle corner brackets with 2 holes can match 20 series aluminum brackets well. The hole size of the corner bracket is 6mm. Great for 3D printers, Routers, cutting machines and robotics projects. Application: Suitable for 20 series aluminum extrusion

Lock Collar

04.00.212

45٫00 ج.م.‏ 25٫00 ج.م.‏

A metal or plastic component that fits onto a shaft and prevents axial movement.

SCS8UU Linear Motion Slide Bearing Block 8mm

05.00.81

100٫00 ج.م.‏ 85٫00 ج.م.‏

SCS8UU 8mm Aluminum Linear Motion Ball Bearing Slide Bushing For CNC.

Nylock Insert Hex LockNut - M5

02.00.06

7٫00 ج.م.‏ 5٫00 ج.م.‏

These Nylon locknuts contain a washer mounted inside the nut that enhances its hold on the nut.

Stainless Steel Angel Corner 90 Degree Two Hole

05.00.90

43٫00 ج.م.‏ 30٫00 ج.م.‏

Brand : Other Type : 3D Printer Accessories

Bearing 608zz 8x22x7

05.00.16

43٫00 ج.م.‏ 35٫00 ج.م.‏

Bearing 608zz 8x22x7 is a type of deep groove ball bearing that has two metal shields on both sides to protect the balls from dust and debris. It is suitable for high-speed applications and can support both radial and axial loads.

M4 Compression Springs Stainless Steel - Pack of 4

10.00.132

24٫00 ج.م.‏ 10٫00 ج.م.‏

These compression springs are made of high-quality stainless steel and have a wire diameter of 0.5mm, an outer diameter of 5.2mm, an inner diameter of 4.2mm, and a length of 20mm. They are suitable for various applications that require compressed force, such as automotive, aerospace, industrial, medical, and technology products.

1m GT2 Rubber Timing Belt Width 6mm

12.09.02

92٫00 ج.م.‏ 70٫00 ج.م.‏

There is no limit to the types of linear motion you can create by making an actuator based on one of these GT2 Timing Belts. They are popular for fast and lightweight movement.

Drop In T-Nut - M3 (20 PCS)

02.00.07

168٫00 ج.م.‏ 150٫00 ج.م.‏

Did you forget to add a Tee Nut? Drop In Tee Nuts are here to save you, just add them to any location on a V-Slot or C-Beam Linear Rail.

SK8 Linear Rod & Shaft End Support 8mm

02.00.24

75٫00 ج.م.‏ 70٫00 ج.م.‏

SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination with precision linear bearings and other applications requiring a precise, round hardened shaft or guide rod. Our SK08 Linear Shaft Supports have overhead clearance by support shaft and end mounting for support.

T-Slot Bolt 20series M5 x 10MM

02.00.21

9٫00 ج.م.‏ 5٫00 ج.م.‏

Brand : Other Type : 3D Printer Accessories

Nylock Nut 3mm Stainless Steel

02.00.32

3٫00 ج.م.‏

MADE FROM HIGH QUALITY 304 STAINLESS STEEL KNOWN FOR ITS DEPENDABLE AND RIGID STRENGTH AS WELL AS ITS CORROSION RESISTANT QUALITY.

M7 Heated Bed Spring & Wade extruder spring

04.00.103

15٫00 ج.م.‏ 10٫00 ج.م.‏

Item specifics :- Type : 3d printer spring Wire diameter : 1.2mm Outer diameter : 7.5mm Inner diameter : 7mm Height : 21mm Number of turns : 9 turns Apply to : 3d printer platform

Spacer Block 6mm (Acrylic)

06.01.05

43٫00 ج.م.‏ 38٫00 ج.م.‏

The V-Slot Spacer Blocks were designed to be used in conjunction with the V-Slot Gantry Plate. "This Spacer Block allows you to raise the V-Slot Gantry Plate up away from the rail 12mm, so that you can run transmission components, such as a Belt Drive or Threaded Rod underneath the V-Slot Gantry Plate." Product Details Qty. 1 M5 Tapped Holes to allow mounting to the V-Slot Gantry Plate 3 Holes that allow for mounting of full size OpenBuilds Wheels Anodized Aluminum Color: Black OpenBuilds Part CAD Models and Drawings Brand : OpenBuilds Type : 3D Printer Accessories

V-Slot Gantry Plate - Universal (Acrylic)

06.12.04

100٫00 ج.م.‏

Our universal gantry plate suitable for many build designs. 3D printing extruders, diode lasers, plasma heads are just some of the possibilities.

Eccentric Spacer 6mm

04.00.49

35٫00 ج.م.‏ 25٫00 ج.م.‏

These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the CAM hole is located.

Anti-Backlash Nut Block for 8mm Metric Acme Lead Screw

04.00.213

150٫00 ج.م.‏ 60٫00 ج.م.‏

This Anti-Backlash Nut Block for 8mm Lead Screw is a great choice for many build projects requiring lead screw linear motion where high precision and repeatability with zero play or slop is needed.